1PC LTJM-2019 Small Rice Mill Polisher Machine Rice Automatic Sheller Thicken Cooling Rice Mill Machine 220V 850W

1. Combine the heavy hammer: press down the release button on the heavy hammer, pull out the connecting rod from the ferroalloy handle, re-insert the heavy hammer into the end of the connecting rod, the release button of the weight must be aligned with the groove on the rod to fix the weight ; 2. Put in the rice: Take a full cup of rice (about 150G) with the sampling cup that comes with it, lift the pressure block, confirm the position of the sieve mesh is accurate, and pour the rice into the processing department. 3, put down the pressure block and heavy hammer: Put the pressure block down, use the front end of the combined weight connecting rod to hook the round hole on the processing part, the rod body presses in the pressure block groove (tips: adjust the weight in the connection The position on the pole can change the gravity applied to the pressure block to suit different rice varieties.) 4, set the working time: open the power switch, the default display time is 60 seconds (tips: the degree of whitening is basically proportional to the working time and the applied gravity), press the "ON" button, in Stop working at any time 5. After stop, check: When the countdown is over, the motor stops running. To ensure safety, after the motor is safely stopped, remove the heavy hammer and pressure block to observe the whitening of the rice. If it is not completely white, follow the steps above. Work again for a number of seconds 6, removal of debris: After completion of processing, pull out the drawer under the processing department, drain rice bran and other waste

• notice:voltage 220 v no support 110v
• Test dosage: about 160G (270ML)
• Shelling rate: ≥99%
• Milled rice broken rate: glutinous rice ≤ 10%, glutinous rice ≤ 20%
• Net weight: 15kg Working voltage: AC220V±10%50HZ Motor power: 850W Working time: Default 30 seconds (10-90 seconds adjustable) Time display method: Digital